We recommend using SprintRay Cloud Design or AI Studio for all your design needs. If you’d prefer to use your own design software, certain settings must be adjusted to get good results.
The settings in this guide help ensure your 3D files meet the ideal conditions for printing, but they do not guarantee fitment. Check the workflow guide for your appliance type for the best overall results.
Crown / Overlay |
|
Minimum thickness |
0.5 - 1 mm |
Extra Cement gap |
0.11 (+/- 0.01) |
Cement gap |
0.04 mm |
Distance to margin line |
0.8 mm |
Smooth distance |
0.2 mm |
Drill radius |
0.65 mm |
Drill compensation tool shape |
Spherical |
Corner tool radius |
0 |
Drill compensation offset |
0.66 mm |
Margin line offset |
0.08 mm |
Extension offset |
0.1 mm |
Offset angle |
55 degrees |
Implant Crown |
|
Use previous settings for Crowns |
|
Additional Spacing for Ti-Base |
0.12 (+/- 0.02) |
Inlay / Onlay |
|
Cement gap |
0.06 mm |
Extra cement gap |
0.14 mm |
Distance to margin line |
1 mm |
Smooth distance |
0.2 mm |
Wall thickness |
0.5 mm |
Margin line offset |
0.06 mm |
Transition distance |
0.5 mm |
Snap distance |
1 mm |
Locality radius |
1 mm |
Veneers |
|
Cement gap |
0.06 mm |
Extra cement gap |
0.11 mm (+/- 0.01) |
Distance to margin line |
1 mm |
Smooth distance |
0.2 mm |
Wall thickness |
0.25 mm |
Margin line offset |
0.06 mm |
Transition distance |
0.5 mm |
Snap distance |
1 mm |
Locality radius |
1 mm |
Night Guards |
|
Teeth offset |
0.1 mm (+/- 0.02 mm) |
Retention |
Flex: 0.05 mm Firm: 0 mm |
Teeth coverage |
2/3 |
Minimum thickness |
1.5 mm |
Buccal/lingual wall thickness |
1.5 mm |
Retainers |
|
Teeth offset |
0.04 mm (+/-0.02 mm) |
Retention |
0.05 mm |
Teeth coverage |
Scalloped |
Minimum thickness |
0.6 mm |
Buccal/lingual wall thickness |
0.6 mm |
Removable Dentures |
|
Minimum thickness |
Upper: 2.5 mm Lower: 3 mm |
Flange height |
Depth of sulcus |
Glue spacing |
0.07 mm |
Minimum thickness under teeth |
0.8 mm |
Coupling settings |
Depth: 2 mm Angle: 10 degrees |
Connector scale settings |
Facial: 70% Lingual: 95% Center: 60% |
Bar and T-bar supports |
Yes |
Partial Dentures |
|
Minimum thickness (Clasps) |
1.2 mm
|
Material Flexibility |
Clasps - 1.2-1.5 mm |
Glue spacing |
0.07 mm |
Minimum thickness under teeth |
0.8 mm |
Coupling settings |
Depth: 2 mm Angle: 10 degrees |
Connector scale settings |
Facial: 70% Lingual: 95% Center: 60% |
Bar and T-bar supports |
Yes |
Die & Model |
|
Die to model spacing/offset |
Standard: 0.1 mm Tight: 0.08 mm |
Fit checking hole |
3 mm |
Pedestal height |
4 mm |
Pin style |
Square |
Pin depth |
4 mm |
Surgical guides |
|
Guide thickness |
2.5 mm |
Sleeve offset |
Standard: 0.2 mm Tighter: 0.06 mm |
Guide offset |
Standard: 0.2 mm Tighter: 0.15 mm |
Inspection window count/location |
3 checking windows |
Tooth coverage |
Half arch |
Cross arch bars |
Yes |
Sleeve shoulder width |
None |
Hybrid dentures |
|
Cement gap (If using Ti-bases) |
0.15 mm |
Minimum thickness (All aspects) |
0.5 - 1 mm |
Bar and T-Bar supports |
Yes |
Default 3D printing parameters |
N/A |