Procedure

The printer calibration allows you to set up compensation coefficients to tune the accuracy of your printer.

1. Generate the L-shaped job in Live Build DLP as stated in Printer Calibration and send it for print.
2. After the L-shaped job is printed, clean it well and post-cure the model as required for the used material.
3. Measure the printed model as shown below using a caliper, see Tolerance List.
   

   

4. From the Home screen of the printer, navigate to Settings > Move and Calibration > Quick Calibration.
   

   

5. Enter the obtained X and Y values in the appropriate fields.
6. Press Save to confirm.
    

Tolerance List