When to Clean

The build platform should remain as clean as possible between print jobs to keep your printer in optimal printing condition. The build platform should be cleaned when:

• build platform becomes sticky
• material cures around the build platform clamping handle
• when changing the material type
   

Cleaning Procedure

1. Clean the connection cavity at the top of the build platform using a Q-tip with 99% IPA.
2. If too much material has cured in the torque knob screw threading, replace the build platform.
3. Clean the surface of the build platform with a clean paper towel.
4. Check every surface for material, buildup, or stickiness.
5. Clean the excessive buildup using a small amount of 99% IPA on a clean paper towel or Q-tip.
6. Hard spots of cured material can be carefully scraped off using the paint scraper from the Starter Kit.