Before You Begin

• Always wear nitrile gloves when handling items that come into contact with uncured resin.
• Only validated material should be used with the printer.
   

Adding the Material

1. Open the printer’s hood.
   

   

2. A material tag is attached to the material bottle. Remove the material tag and place the material tag on the material tag reader.
   

   

3. Shake the material bottle well. Open the material bottle and pour the material slowly into the material tray to the material fill line.
   Do not fill the domeless material tray with material over the top of the material tray ramp.
   

   

4. Mix the material thoroughly with the supplied spatula. Close the hood to protect the material from ambient light.