Start Print Job

1. On the home screen, select the Job List.

2. Select the job folder from the Job List.

3. Press the Play button to start the job.

4. To proceed, select Next.

5. Check the requirements and press Start.

6. Wait several seconds to print right away or press Start Later to delay the start of the job.

7. Set the required delay time using the + (plus) and – (minus) icons and confirm with the Apply button.
The minimum delay time is 15 minutes. The maximum delay time is 999 hours 45 minutes.

Pause Print Job

1. Press the Pause button in the job printing window.
    

2. In the confirmation window, select Yes.

3. To resume a print job, press the blue Play button in the job printing window.

Abort Print Job

1. Press the Abort button in the job printing window.

2. In the confirmation window, select Yes.

 

3. To simplify the debris removal process from the material tray, select Yes.

4. Remove debris from the material tray by removing the thin film of exposed material and following the procedure for filtering the material.

5. To submit a support request, press Yes and follow the steps in the Request Support article.
 

Delete Print Job

1. Select Job List on the main screen.

2. Select the job you want to delete from the list of jobs.
You can delete multiple job folders at once by selecting them using the checkboxes.

3. Press the white Waste Bin icon on the top-right corner to delete the selected job file(s).

4. Press OK to confirm.