Important Note:
The home position calibration can be performed only when the parallelism is achieved. Refer to Einstein: Check Parallelism and Calibration for more details.
- Go to Settings > Move & Calibration > Home Calibration > Auto Homing.
- Select the material tray from the list. Make sure your material tray does not contain material in it. Material residue in the material tray during the calibration will give a false reading to the sensors.
- Select OK.
- The platform starts moving to its Dry position.
- Once the platform finds its Dry position, it starts moving to a Zero position.
- Dry position calibration has been saved.